You bought the car. You are about to buy the car. You already have the car and you are running a 120-volt cord through the laundry room window every night, getting maybe four miles of range an hour, telling yourself this is fine.
It is not fine. Not long-term. And the fix is not complicated — it is just specific.
A proper Level 2 EV charger installation in Selmer, TN comes down to four things done correctly: the right circuit size, the right wire run from the panel to the parking location, the right hardware mounted in the right way, and the documentation that proves all of it to the next inspector, the next homeowner, or the manufacturer when a warranty claim eventually surfaces. Most of what we do at Lincolnton Solar Electric Services is making sure those four things line up the first time.
The EV Charger Services We Install
Every EV charger project starts the same way: a load calculation on the existing service.
Level 2 Charger Installation
A Level 2 charger runs on a 240-volt circuit and pushes most modern EVs from empty to full overnight.
- Dedicated 240V circuit sized correctly
- Full conduit runs and labeling
- Permit pulled and inspected
Tesla Wall Connector
Manufacturer-spec installs with load sharing, app integration, and proper commissioning.
Book Tesla Wall Connector InstallGarage & Outdoor Mounting
Clean professional installations whether inside the garage or mounted outdoors.
Certified Documentation
Installer credentials, permits, and paperwork for rebates and tax credits.
Licensed Electrician for Panel Upgrades
Some homes need a service upgrade before installing a high-amperage charger. We perform load calculations and present clear options.
How a Standard Installation Goes
Site Visit & Load Calc
Panel inspection, location assessment, written quote.
Permit Pulled
We handle all paperwork with local authorities.
Professional Install
4–8 hours for standard jobs. Clean work.
Inspection & Commissioning
We meet the inspector. Vehicle test charge included.
What Most Homeowners in Selmer Get Wrong
Choosing charger amperage before service check
A 48-amp sounds great until the load calculation says otherwise.
Prioritizing aesthetics over proximity
Longer runs increase cost significantly.
Hiring the cheapest contractor
Small savings now can mean expensive repairs later.
Skipping the permit
Creates insurance and resale problems.
EV Charger Installation Cost Drivers
The biggest variables are run distance from panel to charger, panel condition, and the charger model chosen.
Tesla Model Y Owner
From 120V trickle charging (4 miles/hour) to full Level 2 overnight charging in one day.
Why Faster Charging Costs Less Than You Expect
We help you choose the right amperage based on your actual driving habits and your home’s electrical capacity.
What Selmer Customers Have Said
"Lincolnton ran the load calc... Honest recommendation, not a sales pitch."
"Tesla Wall Connector install... Smooth from start to finish."
"They came back... at no extra charge."
Frequently Asked Questions
How long does a standard EV charger install take in Selmer? ↓
Most Level 2 installations take between four and eight hours of on-site work for a standard residential job in Selmer, TN. Complex runs, panel upgrades, or outdoor installations can extend to two days.
Do I need a permit for an EV charger installation? ↓
Yes. Every Level 2 charger installation requires a permit and final inspection. We pull the permit, schedule the inspection, and meet the inspector on site.
Will the install support a second EV charger later? ↓
It can if we plan for it during the first installation.
Does the installation come with a warranty? ↓
The hardware carries the manufacturer's warranty. The installation labor carries our workmanship warranty.
Can you install a charger I already bought? ↓
Yes. We install owner-supplied chargers regularly in Selmer, TN.
Ready for Reliable Overnight Charging?
Schedule your site visit with Lincolnton Solar Electric Services today.
Click Here to Call (888) 355-9624Same-day quotes available in most Selmer areas